
Deck painting & staining Lyndhurst
Deck Painting & Staining Lyndhurst
Deck painting, staining and restoration for Lyndhurst homes, with the preparation and coating system matched to the timber, its existing finish and the way the deck is used.
Step 1 of 2
Get your free quote
Takes under a minute. Free on-site inspection, no obligation.
Tell us about your deck, verandah or stairs and we'll get back to you within 120 minutes during business hours.
At a glance
- Service: Deck painting and staining in Lyndhurst, VIC
- Based in Melbourne's south east
- Local area: Modern, master-planned family suburb in Melbourne's south-east, 8,926 residents at the 2021 census
- Quote: Free on-site inspection and written quote
- Response: We reply within 120 minutes during business hours
- Indicative range: $800 – $9,000+ (every project individually quoted)
- Phone: 0450 944 121
Last updated: 15 October 2026
Quick answers
- Do you paint and stain decks in Lyndhurst? Yes. We paint, stain, oil and restore timber decks, verandahs, stairs, pergolas and balustrades, and we assess composite decking case by case.
- How much does it cost? Our indicative ranges are $800 – $2,000+ for a small deck, $1,800 – $5,000+ for a standard deck and $4,000 – $9,000+ for a large or multi-level deck. Every job is individually quoted after an on-site inspection.
- Which finish is best? Neither paint nor oil is universally better. It depends on the timber, exposure, existing coating and how much upkeep you want.
Paint, stain, oil, restore, or leave it?
Lyndhurst is a master-planned family suburb where the most common household is a couple with children and the average home has close to four bedrooms. Many homes have a timber deck or alfresco area for entertaining, a front verandah or stairs. Decks from the earlier years of the suburb are now old enough to be grey, dry, peeling or tired, while newer ones benefit from the right protection early.
The right finish depends on the timber species, its age and exposure, the existing coating and its condition, the look you want, foot traffic, how much maintenance you are happy with and, for composite boards, the manufacturer's requirements. Solid-colour painting is a strong option, but it is not right for every deck, so each one is assessed individually.
Northern Star Painting is based in Melbourne's south east and works across Lyndhurst, Lynbrook, Hampton Park and Narre Warren South.
Tell us about your deck, verandah or stairs and we'll get back to you within 120 minutes during business hours.
Signs your Lyndhurst deck is due for attention
- Silver-grey, rough boards: the finish has gone and the surface fibres are weathering.
- Dry, thirsty timber: water soaks in instead of beading on the surface.
- Peeling or flaking paint or stain: the coating has lost adhesion and has to be removed, not painted over.
- Mould, algae or dark staining: common in shade and under trees.
- Cupped, split or loose boards: repair jobs for the right trade before coating.
- Protruding screws or nails and black marks around fixings.
- Slippery boards when wet: usually algae, or a finish that is wearing unevenly.
- Wear at stair edges and walkways: where the finish fails first.
Decks we paint, stain and restore in Lyndhurst
Merbau
Contains natural oils and tannins that can bleed and affect adhesion, so it is prepared to the coating manufacturer's instructions first.
Spotted gum and blackbutt
Dense hardwoods that suit stains and oils as well as paint, depending on the look you want and the existing finish.
Treated pine
Common on stairs and framing. Moisture content and the coating system matter more than the species name.
Weathered and grey timber
Grey oxidised fibres are sanded back before coating so the new finish has a sound surface to bond to.
Previously painted decks
Old coatings are checked for adhesion, and failing material is removed rather than coated over.
Alfresco and entertaining decks
Larger decks with furniture and regular foot traffic need a coating system chosen for wear as well as looks.
Verandahs and front porches
Boards, posts and edges are prepared and coated as one connected area.
Pergolas, stairs and balustrades
Posts, beams, handrails and balustrades can be included in the scope. We make no compliance claims about these structures.
Composite decking
Assessed case by case. Some manufacturers do not recommend coating their products, while others may permit specific coating systems. We check the product and manufacturer requirements before recommending anything.
Paint, stain or oil?
Pigmented finishes generally give stronger UV screening than clear ones, but durability depends on the product, exposure, timber and maintenance. No finish is maintenance free.
| Finish | Appearance | UV & weather | Maintenance | Best suited to |
|---|---|---|---|---|
| Solid-colour deck paint | Strongest colour change; hides grain and variation | Good when the full system is applied | Traffic areas wear; preparation is critical | Older or mixed timber, or a set colour scheme |
| Semi-transparent stain | Colour with the grain still visible | Pigment adds UV screening | Periodic recoating | Sound timber where you want colour and grain |
| Penetrating oil | Natural timber look | Lighter protection | Easier to refresh, usually more often | Hardwoods where a natural finish matters |
What we check at inspection
- Timber species and approximate age of the deck, stairs and rails.
- The existing coating: type, thickness and whether it is still bonded.
- Board condition: cupping, splits, soft spots, loose boards and protruding fixings.
- Stairs, handrails and balustrades: loose, damaged or worn parts.
- Shade, drainage and anything holding moisture against the timber.
- Height, access and anything near the deck that needs protecting.
- Whether the boards are composite, which changes the whole approach.
- Whether an old painted surface could contain lead.
Decks beside wetlands and parkland
Decks near trees, reserves and wetlands see more shade, leaf litter and damp, which can leave stains and encourage mould and slippery growth. Growth is cleaned off during preparation, and the cause is discussed with you so the new finish is not asked to hide it.
Covered alfresco decks
A deck under a verandah or pergola roof is protected from direct rain but still sees humidity, sun at the exposed edges and heavy foot traffic. The edges and stairs usually wear first, so they are assessed separately from the covered boards.
Decks that have aged with the suburb
Lyndhurst grew by roughly a third between 2016 and 2021, so decks range from older ones that have been through many summers to recently built ones that have never been coated. Older decks usually need more sanding, repairs and removal of failing finish, while newer ones need correct preparation and the right drying time before their first coating.
How we prepare and coat a deck
- Cleaning: a method suited to the timber and the existing finish, never a blanket pressure wash.
- Growth: mould and algae are cleaned off and the cause is discussed.
- Old coatings: failing material is removed back to a sound edge.
- Sanding: grey weathered fibres and rough areas are sanded to a surface the new finish can bond to.
- Merbau and tannin-rich timber: prepared as the coating manufacturer specifies.
- Fixings and boards: protruding fixings and damaged boards are flagged before coating.
- Drying: coatings go on dry timber, following the manufacturer's drying times.
- Coating: applied as the manufacturer's system, which determines the number of coats.
Solid-colour deck painting
Deck paint is not wall paint on a floor. It is made to cope with foot traffic, UV, moisture, timber movement and furniture. For example, Cabot's describes its Timbercolour Deck & Exterior Paint as self-priming on most surfaces and designed to be walked on. Where a solid-colour timber paint is chosen, the exact preparation and number of coats follow the manufacturer's system.
New timber and weathered timber
New boards contain tannins and natural oils that can affect adhesion and appearance, so they are prepared as the coating manufacturer specifies and left to dry according to its instructions. There is no universal waiting period.
Weathered decks need more than a wash. Grey oxidised fibres are sanded back, failing coatings are removed and damaged boards are identified before anything is applied. Sanding improves the surface, but it does not make structurally damaged timber sound.
Checking the existing coating first
Where the existing coating is uncertain, we check its type and adhesion before recommending a system, and remove failing material rather than coating over it. This is a practical site check, not a laboratory test.
Our deck process
- 01
Inspection and quote
We look at the timber, existing finish, condition, stairs, height and access, then give you a written scope.
- 02
Cleaning suited to the surface
The cleaning method is chosen for the timber and coating, not a blanket pressure wash.
- 03
Sanding and preparation
Weathered fibres, failing coatings and rough areas are dealt with so the new finish can bond.
- 04
Repairs identified
Any damaged boards or structural issues are identified and discussed before coating.
- 05
Coating system
Applied to the manufacturer's system. Some solid-colour systems specify three coats on unpainted timber; the final schedule follows the manufacturer and the surface.
- 06
Quality check and walkthrough
We check coverage, edges and finish, then walk you through the completed work.
Sun, shade and wear on Lyndhurst decks
Decks that get long hours of direct sun weather differently to shaded, damp spots beside fences, walls and trees. Summer UV, wet winters and daily foot traffic all work on a coating over time, and entertaining areas with heavy furniture wear faster at the edges and in the walkways. We take the exposure of each deck into account when recommending a finish.
Planning and safety
Lyndhurst sits across the City of Casey and the City of Greater Dandenong, so the council that applies depends on your address. Many master-planned estates also have design guidelines or covenants that can cover externally visible colours, finishes and fence styles. Check your contract of sale, title documents or estate guidelines, and your council's requirements, before changing anything that can be seen from the street.
Older painted timber should be treated cautiously because paint from before the 1970s may contain lead, so we don't recommend disturbing an old coating until its condition and the right handling have been considered.
Painting or coating a deck does not make the deck structure, balustrade or pool barrier compliant with building or safety requirements.
What's included and what isn't
Included in a standard deck quote: the agreed cleaning and preparation, sanding, removal of failing coating, the coating system, protection of plants, paving and nearby surfaces, clean-up, and a walkthrough, all in a written scope.
Not included unless agreed in writing: board replacement, carpentry or structural repairs, balustrade or building compliance work, and tree trimming.
Getting your Lyndhurst deck ready
- Clear furniture, pots and decorations off the deck and stairs.
- Trim plants back from the edges where you can.
- Tell us about pets, pools and any access issues before we start.
- Plan to keep children and pets off the deck until the coating manufacturer says it is safe.
What to expect on the job
Deck coatings need dry timber and suitable weather, and each coat needs drying time before the next. We will tell you when the deck can be walked on and when furniture can go back, based on the product used. We do not promise fixed timeframes, because they depend on the timber, the product and the weather.
Deck work near Lyndhurst
Genuine Northern Star Painting deck jobs from nearby suburbs, labelled with where they were done.



Choosing a colour? Consider the house, roof, fence, landscaping, paving, doors, windows and existing timber. No colour is objectively best. Our colour consultation can help, and we also offer wood staining and clear finishes.
Deck painting: indicative pricing
These are indicative price ranges only. Every project is individually quoted after an on-site inspection. Scope, condition and access change the number significantly.
| Project | Indicative range |
|---|---|
| Small deck, clean, sand and oil | $800 – $2,000+ |
| Standard deck, restoration and stain | $1,800 – $5,000+ |
| Large or multi-level deck | $4,000 – $9,000+ |
Size, condition, stairs, height, access, existing coatings, repairs and the chosen finish all affect the price. Every project is individually quoted after inspection, with the agreed scope provided in writing. These ranges match our main deck painting and staining services page.
What moves the price: deck area and number of levels; timber species; how much old coating has to come off; sanding and preparation; stairs, handrails and balustrades; the finish chosen (paint, stain or oil); access; and any repairs needed first.
Why Northern Star Painting
- Based in Melbourne's south east: Working across Lyndhurst and the south-east.
- Fully insured: Cover in place for work on your property.
- Dulux & Haymes systems: Paint and materials included.
- Written scope and quote: Preparation-led work, with everything agreed in writing.
Deck Painting Lyndhurst FAQs
How much does deck painting cost in Lyndhurst?
There is no set Lyndhurst price. Our published indicative ranges are Small deck, clean, sand and oil: $800 – $2,000+; Standard deck, restoration and stain: $1,800 – $5,000+; Large or multi-level deck: $4,000 – $9,000+. Deck size, condition, stairs, access, existing coatings and the chosen finish all affect the price. Every project is individually quoted after inspection, with the agreed scope provided in writing.
My deck is under a covered alfresco roof. Does it still need recoating?
Often, yes. Covered decks still see humidity, foot traffic and sun at the exposed edges, and the finish can wear or fail over time. The inspection checks each area of the deck and recommends what it actually needs.
My deck backs onto a reserve and has mould. Can it be restored?
Often, yes, once the growth is cleaned off and the timber is dry and sound. The cause, such as shade, debris or poor drainage, is discussed so the new coating is not asked to hide an ongoing moisture problem.
Which council do I deal with in Lyndhurst?
Lyndhurst sits across the City of Casey and the City of Greater Dandenong, so it depends on your address. Check your council's requirements, and any estate guidelines, before changing the look of a deck or verandah visible from the street.
Can you coat the stairs and balustrade as well?
Yes. Stairs, handrails and balustrades can be included in the scope. We make no compliance claims about these structures, and any damaged or loose parts are raised with you before coating.
Is it better to paint or oil a deck?
Neither is universally better. Paint gives the strongest colour change and hides grain. Oil keeps a natural look and is easier to refresh but usually needs more frequent maintenance. The right choice depends on the timber, exposure, existing coating and how much upkeep you want.
Can you paint a Merbau deck?
Yes, with the right preparation. Merbau contains natural oils and tannins that can affect adhesion and appearance, so it is prepared according to the coating manufacturer's instructions before any paint, stain or oil goes on.
Do you need to sand a deck before painting?
Usually some sanding is needed to remove grey weathered fibres, failing coatings or rough areas, but the amount depends on the deck's condition and the coating system chosen.
Can you paint composite decking?
It depends on the manufacturer. Some do not recommend coating their products, while others permit specific coating systems. We check the product and manufacturer requirements before recommending anything.
Is painted decking slippery?
It depends on the coating system and conditions. Some finishes can be slippery when wet, so a slip-resistant additive or a different finish can be discussed at quote.
Should I coat a new deck straight away?
It depends on the timber and any finish already on it. New boards need correct preparation and the right drying time before coating, and the timing follows the coating manufacturer's instructions.
How long does a painted deck last?
There is no fixed lifespan. Durability depends on the product, exposure, timber, preparation, foot traffic and maintenance. Pigmented finishes generally give stronger UV screening than clear ones.
Questions to ask any deck painter
- Will you inspect the deck in person before quoting? Board condition, existing coatings and fixings can't be judged from a photo.
- How will you deal with the old finish? Failing coating should be removed, not painted over.
- What preparation is included? Cleaning, sanding and drying time decide how long the finish lasts.
- Which product and finish do you recommend and why? You should hear why paint, stain or oil suits your timber.
- How do you handle Merbau and other tannin-rich timber? It needs specific preparation.
- Is the scope written down, including what isn't included? Board repairs and carpentry are common exclusions.
- When can we use the deck again? The answer should follow the product's instructions.
Related pages
Ready to restore your Lyndhurst deck?
Ready when you are
Let's paint something you'll be proud of.
Free on-site quotes across Melbourne. No pressure, no shortcuts, just an honest scope and a clean finish.
Request a quote