
Epoxy & garage floors
Epoxy Floor Coatings in Melbourne
Garage, workshop and commercial floors prepared properly and coated to last.
Step 1 of 2
Get your free quote
Takes under a minute. Free on-site inspection, no obligation.
Why epoxy floors fail
Most failed epoxy floors fail underneath, not on top. If the concrete isn't ground back to a clean, open surface, if cracks and pitting aren't repaired, or if moisture rising through the slab isn't dealt with, the coating lifts, no matter how good the product is. Preparation is the job.
What the job includes
A standard epoxy floor scope covers:
- On-site inspection of the slab: age, condition, cracks, oil contamination and moisture risk
- Mechanical grinding to remove sealers, laitance and old coatings and open the surface
- Crack and pit repair
- Primer where the system calls for it
- Epoxy base coat, with decorative flake or a plain finish if you prefer
- Protective topcoat for wear and chemical resistance
- Cure time explained in writing before you drive on it
Where it suits
Home garages, workshops, sheds, laundries, showrooms, warehouses and light commercial floors.
What we'll tell you honestly
Some floors need a different system, such as polyurethane or a moisture-tolerant primer, and some slabs have problems that need fixing first. We'll recommend what suits the floor and your use, not the most expensive option.
Epoxy floor cost
Every floor is quoted after an inspection. Slab condition, area, preparation needed and the finish you choose drive the price.
Our process, start to finish
- 01
On-site inspection
We walk the job with you, measure up, check surface condition and note anything that needs repair before a brush is lifted.
- 02
Written scope and quote
You receive an itemised quote listing surfaces, coats, products and inclusions — so you know exactly what you are paying for.
- 03
Protection and preparation
Floors, fixtures and landscaping are covered. Preparation is the stage that decides how long the finish lasts, so it is never rushed.
- 04
Application
Primers and topcoats applied to manufacturer specification, in the right conditions, with the correct number of coats.
- 05
Quality inspection
We inspect cut-ins, edges and coverage in natural light and correct anything that falls short before we call it finished.
- 06
Final walkthrough
We walk the completed job with you, hand over touch-up paint and colour records, and only invoice once you are happy.
Epoxy Floor Coatings — indicative pricing
These are indicative price ranges only. Every project is individually quoted after an on-site inspection — scope, condition and access change the number significantly.
| Project | Indicative range |
|---|
Frequently asked questions
How long does an epoxy floor take?
Typically a few days including grinding, coating and cure, depending on the system. We give you dates in writing.
Can I park on it straight away?
Not immediately. Cure times depend on the product and conditions and we'll tell you before the job starts.
Do you grind the floor first?
Yes. Mechanical grinding is part of proper preparation.
Can epoxy go over an old coating?
Usually it needs to be removed or ground back. We assess on site.
Is epoxy slippery?
Smooth epoxy can be slippery when wet. Anti-slip additives are available and we'll discuss them.
Do you do commercial floors?
Yes. Staged around trading where needed.
Related services
Ready when you are
Let's paint something you'll be proud of.
Free on-site quotes across Melbourne. No pressure, no shortcuts, just an honest scope and a clean finish.
Request a quote