Timber deck staining and restoration at a Melbourne home by Northern Star Painting

Outdoor service

Deck Painting and Staining Melbourne

Timber decks, pergolas and outdoor screens restored, sanded and coated. Oil, stain or paint — matched to the timber, the exposure and how much maintenance you actually want to do.

Step 1 of 2

Get your free quote

Takes under a minute. Free on-site inspection, no obligation.

What do you need painted?
What type of property?

Deck staining service

Our deck staining service starts with a full clean and timber brightener, then sanding to open the grain, then a penetrating stain matched to the timber and how exposed the deck is. Stain protects against UV and moisture while keeping the grain visible.

Deck sanding

Sanding removes weathered grey timber and old coatings so the new finish can bond. We machine sand decking and hand sand edges, stairs and balustrades, and refix or replace badly split boards first.

Deck oiling

Oiling suits decks where you like a natural look and don't mind a regular refresh. We prepare the timber properly, apply the oil in dry conditions and tell you when it will need recoating.

Deck restoration

A greyed, mouldy or splintering deck usually isn't beyond saving. Restoration means cleaning, brightening, repairing, sanding and recoating, so the deck looks and feels like new timber.

Deck painting

Where you want solid colour, or the timber is too far gone for a natural finish, we use a deck paint or solid stain system on properly prepared boards.

Stain, oil or paint: which is right for your deck?

The right finish depends on the look you want and the maintenance you are willing to do:

  • Oil — natural look, grain visible; refresh regularly; best for decks you want to keep looking like timber
  • Stain — tinted or clear, grain visible, more UV protection; longer intervals than oil; best for exposed, sunny decks
  • Paint / solid stain — solid colour, hides the grain; full removal needed to change later; best for tired timber or a specific colour

Deck staining near you

We stain and restore decks across Melbourne's south east, bayside, the Mornington Peninsula and the inner east. See the by-suburb list below for your area.

Outdoor timber has a short memory

A deck takes more punishment per square metre than any other surface on your property. Direct UV, foot traffic, rain, pot plants and furniture all work on it, and untreated or lapsed timber goes grey, splinters and cups within a couple of seasons.

Staining vs painting — what is right for your deck

This is the decision that matters most, and it depends on the timber, the exposure and the maintenance you are realistically willing to do.

  • Decking oil — penetrates and enriches the grain, easiest to re-coat, needs redoing every 12–24 months
  • Timber stain — more pigment, better UV protection, longer intervals, still shows the grain
  • Solid stain — near-opaque colour with timber texture retained, good on tired older decks
  • Exterior paint — maximum colour choice and coverage, but on a deck it will wear at traffic points and needs full removal to change later

Timber preparation and restoration

Every deck job starts with a full clean and, where the timber has greyed, a timber cleaner or brightener to strip the oxidised surface layer and restore the natural colour underneath. Nails and screws are punched or reset, loose boards refixed, and badly split boards replaced.

The deck is then sanded — a full machine sand on a badly weathered deck, a lighter cut on a maintained one — to open the grain so the coating can penetrate rather than sit on top. Coating an unsanded, greyed deck is why so many DIY oil jobs peel off in patches within a season.

Maintenance you can plan for

We tell you at handover exactly what the re-coat cycle looks like for the system we have applied, so you can budget for it. Oiled decks want an annual or biennial refresh. Stained decks stretch further. A maintained deck costs a fraction of a restored one — the expensive job is always the one that got left for five years.

Looking for deck staining only? See our deck staining service.

Our process, start to finish

  1. 01

    On-site inspection

    We walk the job with you, measure up, check surface condition and note anything that needs repair before a brush is lifted.

  2. 02

    Written scope and quote

    You receive an itemised quote listing surfaces, coats, products and inclusions — so you know exactly what you are paying for.

  3. 03

    Protection and preparation

    Floors, fixtures and landscaping are covered. Preparation is the stage that decides how long the finish lasts, so it is never rushed.

  4. 04

    Application

    Primers and topcoats applied to manufacturer specification, in the right conditions, with the correct number of coats.

  5. 05

    Quality inspection

    We inspect cut-ins, edges and coverage in natural light and correct anything that falls short before we call it finished.

  6. 06

    Final walkthrough

    We walk the completed job with you, hand over touch-up paint and colour records, and only invoice once you are happy.

Deck Painting & Staining — indicative pricing

These are indicative price ranges only. Every project is individually quoted after an on-site inspection — scope, condition and access change the number significantly.

ProjectIndicative range
Small deck — clean, sand and oil$800 – $2,000+
Standard deck — restoration and stain$1,800 – $5,000+
Large or multi-level deck$4,000 – $9,000+

Frequently asked questions

Should I oil or stain my deck?

Oil looks warmer and is easier to re-coat but needs doing every one to two years. Stain carries more pigment, protects better against UV and lasts longer between coats. We recommend based on your timber, exposure and how much ongoing maintenance you want.

Do you sand decks before coating?

Yes. Sanding removes the oxidised grey surface layer and opens the grain so the coating penetrates. Skipping it is the main reason deck coatings peel.

How long before I can walk on the deck?

Usually 24 hours for light foot traffic and 48 to 72 hours before furniture goes back on. We will confirm based on the product and the weather.

How often does a deck need re-coating?

Oiled decks every 12 to 24 months, stained decks every two to four years. North-facing and unroofed decks sit at the shorter end of both ranges.

How much does it cost to stain a deck in Melbourne?

It depends on deck size, condition and the finish you choose. The price table above shows indicative ranges, and every deck is quoted after an inspection.

Can you restore a grey deck?

Usually yes. A clean, brightener treatment and sand brings most greyed decks back to sound timber ready for coating.

How long does it take?

A typical deck takes two to four days across cleaning, drying, sanding and coating, weather permitting.

Deck Painting & Staining by suburb

Related services

Ready when you are

Let's paint something you'll be proud of.

Free on-site quotes across Melbourne. No pressure, no shortcuts, just an honest scope and a clean finish.

Request a quote
Call 0450 944 121Get Free Quote