
Fence painting Lyndhurst
Fence Painting Lyndhurst
Fence and gate painting for Lyndhurst homes, with the preparation and coating system matched to the fence material, its condition and the finish you want.
Step 1 of 2
Get your free quote
Takes under a minute. Free on-site inspection, no obligation.
Tell us the fence type, rough length and any gates, and we'll get back to you within 120 minutes during business hours.
At a glance
- Service: Fence painting and staining in Lyndhurst, VIC
- Based in Melbourne's south east
- Local area: Modern, master-planned family suburb in Melbourne's south-east, 8,926 residents at the 2021 census
- Quote: Free on-site inspection and written quote
- Response: We reply within 120 minutes during business hours
- Indicative range: $600 – $6,000+ (every project individually quoted)
- Phone: 0450 944 121
Last updated: 15 October 2026
Quick answers
- Do you paint fences in Lyndhurst? Yes. We paint and stain timber, COLORBOND® and steel, brick and rendered, and metal fences and gates across Lyndhurst, from estate boundary fences to corner-lot and front fences.
- How much does it cost? Our indicative ranges are $600 – $2,500+ for a standard residential fence and $2,500 – $6,000+ for a long boundary or double-sided fence. Every project is individually quoted after an on-site inspection.
- How do I get a quote? Request a free quote online or call 0450 944 121. We reply within 120 minutes during business hours.
Fences in a master-planned family suburb
Lyndhurst is a master-planned suburb in Melbourne's south-east that sits across the City of Casey and the City of Greater Dandenong. At the 2021 census it had 8,926 residents, roughly a third more than in 2016, and the most common household is a couple with children. About four in five homes are owner-occupied, and the average home has close to four bedrooms, so these are family houses with real backyards and plenty of fence line.
Most of Lyndhurst's housing is concentrated in estates such as Marriot Waters, which is built around wetlands and parkland, while planning data shows more than half of the suburb's land area is green wedge. The residential parts are therefore relatively compact: fences run between close neighbours, back onto reserves, or face the street on corner lots. Lynbrook and Merinda Park railway stations are nearby.
Every fence is assessed on its own: material, length, height, existing coating, vegetation and access all shape the scope. Northern Star Painting is based in Melbourne's south east and works across Lyndhurst, Lynbrook, Hampton Park and Narre Warren South.
Tell us the fence type, rough length and any gates, and we'll get back to you within 120 minutes during business hours.
Signs your Lyndhurst fence is due for attention
- Faded or chalky COLORBOND®: the colour looks washed out, or rubs off on your hand. This usually means the surface needs a clean and, if the steel is sound, a compatible coating.
- Timber that has gone silver-grey and rough: the original finish has worn off and the surface fibres are weathering.
- Flaking or peeling paint: the coating has lost adhesion and will keep lifting. It has to be removed, not painted over.
- Stain that has worn away in patches: usually the sides facing the weather first.
- Surface rust at posts, fixings, hinges or panel edges: rust spreads under a coating if it is not treated first.
- Green or black growth on shaded sides: mould and algae need cleaning off before any coating.
- Splits, cupping or loose palings: these are repair jobs for the right trade, done before any coating.
Fence types we paint and stain in Lyndhurst
Timber paling and slat fences
Cleaned, sanded where needed and coated with a paint or stain suited to the timber's condition. New timber needs correct preparation and drying first, and weathered timber is sanded back to sound fibres.
COLORBOND® and steel fences
Cleaned, checked for corrosion, rust treated where appropriate, primed and top-coated with a compatible system. Overpainting can affect the manufacturer's warranty, so check your warranty first.
Mixed timber and steel fences
Each material gets its own preparation and primer so the finish is consistent along the whole fence line, even where timber palings sit on steel posts or rails.
Brick, rendered and masonry fences and pillars
Masonry is prepared and coated with a system suited to the substrate. Loose paint, mould and failed render are dealt with before coating.
Metal and decorative fencing
Steel and aluminium panel, picket and pool-style fencing can be prepared and coated. We make no claims about pool-barrier compliance.
Side gates, entry gates and pillars
Timber and metal gates, hinges and surrounding pillars can be included in the scope and are often the first items to show wear.
Paint, stain, repair or replace?
A coating protects and refreshes a sound fence. It does not fix rotten posts, loose palings or structural failure.
| Option | What it means | When it may suit |
|---|---|---|
| Paint | Solid colour coating | Sound fences where a uniform colour is wanted |
| Stain | Colour with the grain still visible | Sound timber where a natural look is preferred |
| Repair + coat | Defects fixed by the right trade first | Isolated loose palings or damaged rails |
| Replace | New fencing by a fencing contractor | Extensively rotten or failed fencing |
If a fence is past saving, we will tell you at inspection instead of quoting a coating that will not last.
What we check at inspection
- The material and approximate age of each fence run, including gates and pillars.
- Length, height and the number of gates, so the quote reflects the real scope.
- Posts, rails and palings for movement, rot, splits and loose fixings.
- The existing coating: its type and whether it is still bonded to the surface.
- Rust: where it started and how far it has spread.
- Vegetation contact, garden beds and ground level at the base of the fence.
- Access to both sides, and anything near the fence that needs protecting.
- Anything that could be asbestos cement, which stops the job until it has been assessed.
Fences beside parks, wetlands and reserves
Lyndhurst has parkland and wetlands running through its estates, so a number of properties back onto reserves. These fences can face more weather, more moisture and more contact with vegetation, and there may be extra rules about what you can change on a fence that adjoins public land. We check exposure and condition at inspection and recommend you confirm any rules with your council before changing the fence.
Corner lots and front fences
Corner-lot and front fences are the most visible on an estate street, so they are often the first ones people want to refresh. Colour, height and material can be covered by estate guidelines, so check those first. We can quote the work and leave the approval check with you.
Fences that have aged with the suburb
The suburb grew by roughly a third between 2016 and 2021, so there are fences of very different ages: older estate fences that are now well weathered, and newer fences that are only starting to fade. The right answer is different for each. An older, sun-beaten fence may need full sanding and repair, while a newer one may only need a clean and a refresh before the finish fails.
How we prepare and coat each fence material
- New timber: prepared as the coating manufacturer specifies and left to dry according to its instructions. There is no universal waiting period.
- Weathered timber: cleaned, sanded back to sound fibres, and coated with a paint or stain suited to its condition.
- COLORBOND® and painted steel: washed, lightly keyed where needed, checked for rust, and coated with a compatible system.
- Galvanised and zinc-coated steel: cleaned and primed with a primer suited to zinc-coated steel before top coats.
- Rusted steel: loose rust removed, remaining rust treated, then primed before coating.
- Brick, render and masonry: cleaned of mould and loose material, repaired where needed, then coated with a system suited to the substrate.
- Aluminium and powder-coated metal: cleaned and primed with a suitable primer before coating.
Shared boundary fences
Most fences between Lyndhurst neighbours are dividing fences. Under Victoria's Fences Act 1968 a dividing fence is generally shared, so talk to your neighbour before changing the look or colour of your side. If you would like both sides done, we can quote them together. This is general information, not legal advice; Consumer Affairs Victoria has guidance.
Estate and council requirements
Lyndhurst sits across the City of Casey and the City of Greater Dandenong, so the council that applies depends on your address. Many master-planned estates also have design guidelines or covenants that can cover externally visible colours, finishes and fence styles. Check your contract of sale, title documents or estate guidelines, and your council's requirements, before changing anything that can be seen from the street.
COLORBOND® fences and warranty
BlueScope's guidance says COLORBOND® steel can be overpainted with the right preparation and coating selection, but overpainting can affect or void the manufacturer's warranty. Check your warranty conditions before proceeding.
Older fences, asbestos and lead
Asbestos cement products were banned from Australian building materials by the end of 2003. Older cement-sheet (fibro) fences, and fences on older properties, may contain it, while fences in newer estates are unlikely to. Asbestos can't be identified by appearance, so suspected material should be assessed by a qualified professional before it is disturbed, and it is never pressure-washed. Older painted timber may contain lead, which changes how preparation is handled. WorkSafe Victoria has guidance. Painting a fence does not make a pool barrier compliant.
Our fence process
- 01
Inspection and quote
Material, length, height, gates, posts, access, existing coating and vegetation are checked, then scoped in writing.
- 02
Cleaning suited to the material
Never a blanket pressure wash, and never on asbestos cement.
- 03
Preparation
Sanding, scraping and rust treatment. Any repairs needed are identified before coating.
- 04
Priming as needed
Bare timber, steel and masonry are primed to suit the coating system.
- 05
Coating system
Applied to the manufacturer's requirements. There is no universal coat count.
- 06
Quality check and walkthrough
We check coverage, edges and gates, then walk you through the finished fence.
What's included and what isn't
Included in a standard fence quote: the agreed cleaning and preparation, priming where needed, the coating system, protection of plants, paving and nearby surfaces, clean-up, and a walkthrough, all in a written scope.
Not included unless agreed in writing: fence repair or replacement, asbestos assessment or removal, tree trimming, and your neighbour's consent for their side.
Getting your Lyndhurst fence ready
- Trim plants back from the fence line where you can.
- Move furniture, bins, vehicles and garden items away from both sides of the fence.
- Tell us about sprinklers, pets, pools and side access before we start.
- If both sides are being done, talk to your neighbour about timing and access.
What to expect on the job
Coatings need suitable drying conditions, so scheduling follows the weather and the manufacturer's drying and recoat times. We will tell you when the fence can be touched or leaned on again, based on the product used. We do not promise fixed timeframes, because they depend on the fence, the product and the weather.
Fence work near Lyndhurst
Genuine Northern Star Painting fence jobs from nearby suburbs, labelled with where they were done.



Not sure on colour? Consider the house, roof, gates, landscaping and neighbouring fences. Our colour consultation can help you compare options.
Fence painting: indicative pricing
These are indicative price ranges only. Every project is individually quoted after an on-site inspection. Scope, condition and access change the number significantly.
| Project | Indicative range |
|---|---|
| Standard residential fence | $600 – $2,500+ |
| Long boundary or double-sided fence | $2,500 – $6,000+ |
Length, height, material, condition, gates, posts, access, vegetation and repairs all affect the price. Every project is individually quoted after inspection, with the agreed scope provided in writing. These ranges match our main fence painting services page.
What moves the price: total length; height; timber, steel or masonry; the existing coating and how much has to come off; rust treatment; gates and pillars; one side or both; vegetation and access; and any repairs that need doing first.
Why Northern Star Painting
- Based in Melbourne's south east: Working across Lyndhurst and the south-east.
- Fully insured: Cover in place for work on your property.
- Dulux & Haymes systems: Paint and materials included.
- Written scope and quote: Preparation-led work, with everything agreed in writing.
Fence Painting Lyndhurst FAQs
How much does fence painting cost in Lyndhurst?
There is no set Lyndhurst price. Our published indicative ranges are Standard residential fence: $600 – $2,500+; Long boundary or double-sided fence: $2,500 – $6,000+. Length, height, material, condition, gates, posts, access and vegetation all affect the price. Every project is individually quoted after inspection, with the agreed scope provided in writing.
Can you paint a fence that backs onto a park or wetland?
Often, yes. Fences next to reserves are assessed for moisture, vegetation contact and sun exposure, then prepared to suit. If the fence is on or near public land, confirm any rules with your council before changing it.
Which council do I deal with in Lyndhurst?
Lyndhurst sits across the City of Casey and the City of Greater Dandenong, so it depends on your address. Check your council's requirements, and any estate guidelines, before changing a fence visible from the street.
Can you repaint a corner-lot or front fence?
Yes. These are the most visible fences on an estate street, so check any estate guidelines or covenants on colour, height and material first. We can quote the work and leave the approval check with you.
Can you paint a COLORBOND® fence?
Yes, with the right preparation and coating system. BlueScope advises that overpainting can affect its warranty, so check your warranty conditions before going ahead.
Should I paint or stain a timber fence?
Paint gives a solid, uniform colour. Stain lets the grain show and is often easier to refresh. The choice depends on the timber, its condition, the look you want and the maintenance you are happy with.
Do I need my neighbour's agreement to paint a dividing fence?
A dividing fence is generally shared under Victoria's Fences Act 1968, so it is sensible to talk to your neighbour before changing the appearance or colour of your side. This is general information, not legal advice; Consumer Affairs Victoria has guidance.
Can you paint both sides of a fence?
Yes, both sides can be included in a quote. The neighbour's side should be agreed with them first.
Can you paint a mixed timber and steel fence?
Yes. Timber and steel need different preparation and primers, so each material is treated to suit and the finished colour matches along the whole fence.
Can you paint side gates, entry gates and pillars?
Yes. Timber and metal gates, and brick or rendered pillars, can be included in the scope and prepared to suit each material.
Do you work in nearby Lynbrook and Hampton Park as well?
Yes. We are based in Melbourne's south east and work across Lyndhurst, Lynbrook, Hampton Park and Narre Warren South.
How long does a painted fence last?
There is no fixed lifespan. It depends on the material, preparation, exposure, vegetation contact and the coating system used.
Questions to ask any fence painter
- Will you inspect the fence in person before quoting? A quote without an inspection cannot account for rot, rust or old coatings.
- What preparation is included? Cleaning, sanding and rust treatment are what make a coating last.
- Which coating system will you use, and who makes it? You should be told the product and the manufacturer's requirements.
- How do you handle old paint that is peeling? It should be removed, not painted over.
- Is the scope written down? A written scope prevents misunderstandings about gates, pillars and both sides.
- Are you insured? Check before work starts.
- What isn't included? Repairs, tree trimming and asbestos assessment are common exclusions.
Related pages
Ready to refresh your Lyndhurst fence?
Ready when you are
Let's paint something you'll be proud of.
Free on-site quotes across Melbourne. No pressure, no shortcuts, just an honest scope and a clean finish.
Request a quote