
Roof painting Officer
Roof Painting Officer
Roof painting for Officer homes, with the preparation and coating system matched to the roof type, its condition and how the roof is used.
Step 1 of 2
Get your free quote
Takes under a minute. Free on-site inspection, no obligation.
Tell us about your roof, any garage or patio roofs, and whether the roof feeds a rainwater tank. We'll get back to you within 120 minutes during business hours.
At a glance
- Service: Roof painting and restoration in Officer, VIC
- Based in Melbourne's south east
- Service area: Officer and Melbourne's south-east
- Quote: Free on-site inspection and written quote
- Response: We reply within 120 minutes during business hours
- Indicative range: $2,500 – $15,000+ (every project individually quoted)
- Phone: 0450 944 121
Last updated: 15 October 2026
Quick answers
- Do you paint roofs in Officer? Yes. We assess and paint concrete tile, terracotta and COLORBOND® or metal roofs, including garage and patio roofs, and repair ridge capping before coating.
- How much does it cost? Our indicative ranges run from $2,500 – $5,000+ for a small roof to $10,000 – $15,000+ for a large or complex one, with metal roofs at $3,000 – $12,000+. Every job is individually quoted after an on-site inspection.
- Will painting fix a leak? No. Painting does not fix leaks, broken tiles or failed flashings. Those are identified at inspection and dealt with first.
Assess the roof first. Paint only when the roof and coating system are suitable.
Officer homes come with a mix of roof types and roof sizes, from compact single-storey roofs to larger family homes with garages, patios and several roof sections. Concrete tile, terracotta and COLORBOND® or metal roofs each need a different assessment, preparation and coating system, so we look at the roof before talking about paint.
Housing here grew quickly: the suburb's population rose by roughly a third between 2016 and 2021. That means roofs of different ages, from those now past the 15 to 25 year mark, which are showing sun fade, chalking, moss in shaded sections and ageing ridge bedding, to newer roofs that simply need to be left alone. Each roof is assessed before anything is recommended, because a coating is only worth applying to a roof that is sound underneath.
Northern Star Painting is based in Melbourne's south east and works across Officer and nearby south-east suburbs including Berwick, Narre Warren South and Narre Warren.
Tell us about your roof, any garage or patio roofs, and whether the roof feeds a rainwater tank. We'll get back to you within 120 minutes during business hours.
Signs your Officer roof is due for attention
- Faded or uneven colour across slopes: sun-facing sides usually fade first.
- Chalking: colour rubs off on your hand when you touch a tile, meaning the surface layer has broken down.
- Moss, lichen or dark streaks: usually on shaded slopes, valleys and under trees.
- Cracked or crumbling ridge pointing: the mortar along the ridges is failing.
- Cracked, chipped or slipped tiles: these need repair before any coating.
- Flaking old coating: loose coating has to come off before new coating goes on.
- Surface rust or rusty screws on metal roofs: rust under a coating keeps spreading.
- Staining at valleys and below trees: debris holding moisture against the roof.
Roof types we assess
Concrete tile roofs
Cleaned, checked for cracked or slipped tiles and ridge bedding and pointing, repaired where needed, then primed or sealed where required before a compatible membrane. Painting alone won't repair a broken tile.
COLORBOND® and metal roofs
Cleaning and degreasing, corrosion checks, rust treatment where appropriate, a suitable metal primer and compatible topcoat, following the manufacturer's requirements.
Terracotta roofs
Assessed individually. Glazed terracotta is generally unsuitable for coating; unglazed terracotta may suit coating depending on condition.
Garages, patios and extensions
Each separate roof is assessed and quoted on its own material, condition, access and coating compatibility. Mention every roof you want looked at when you ask for a quote.
What we check at inspection
- Roof type, approximate age and overall condition, from a safe vantage point and on the roof where safe access allows.
- Tile condition: cracks, chips, slipped tiles and loose surface coating.
- Ridge and hip capping: bedding and pointing condition.
- Valleys, and the visible condition of flashings and penetrations such as vents and flues.
- Gutters and downpipes, as far as they affect the roof job and any tank connection.
- Moss and lichen: where, how thick, and what is feeding it.
- Pitch, height, access and where edge protection is needed.
- Any rainwater tank connection, and any other roofs on the property.
- Anything that could be asbestos cement, which stops the job until it has been assessed.
Ridge capping, bedding and pointing
On a tile roof, the mortar bedding and pointing along the ridges can be among the first parts to crack or detach as the roof ages. It is checked at every inspection and repaired before coating, because painting alone will not stop a ridge cap moving or a leak starting.
Larger family roofs and access
Larger family homes mean larger roof areas, multi-level sections and more edge protection. Pitch, height and access all feed into the quote, so tell us about garages, patios and extensions as well as the main roof. Access and edge protection are planned for each property before work begins.
Wetlands, parkland and tree cover
Trees, damp conditions and shade can encourage moss and lichen on roofs and leave debris in valleys and gutters. Shaded sections are assessed separately because they affect the cleaning method and how long a coating takes to dry.
Moss, lichen and shaded roof sections
Shaded sections and valleys, especially under overhanging trees, can hold moss and lichen, while sun-exposed slopes tend to fade and chalk. The cleaning method suits the roof material and the type of growth, and suspected asbestos cement sheeting is never pressure-washed.
How we prepare and coat each roof type
- Concrete tile: washed down, loose surface coating removed, moss and lichen treated, damaged tiles identified, ridge bedding repaired, then sealer or primer where required and a compatible membrane coating.
- COLORBOND® and metal: degreased and washed, rust treated, loose fixings flagged, then a metal primer and compatible topcoat.
- Terracotta: assessed individually before any coating is recommended.
- Older cement-sheet roofs: not touched until assessed by a qualified professional.
Does your roof supply a rainwater tank?
If your roof supplies a rainwater tank, tell us before quoting so the proposed coating can be checked against the manufacturer's product data and the way the collected water is used. We don't claim any roof paint is automatically drinking-water safe.
A new coating does not remove existing contamination. Follow the coating manufacturer's instructions for when rainwater collection can resume after painting, which may mean disconnecting the downpipe to the tank for a period, and refer to Australian and Victorian health guidance on rainwater tanks.
Paint, repair, restore or replace?
Painting alone does not fix leaks, broken or slipped tiles, failed ridge bedding, significant rust or perforation, structural problems or defective flashings.
| Option | What it means | When it may suit |
|---|---|---|
| Painting only | Preparing and coating a sound roof | The material suits coating and its condition is manageable |
| Repairs + painting | Fixing specific defects, then coating | A few broken tiles or minor issues need attention first |
| Restoration | Re-bedding, re-pointing and tile repairs before coating | Several defects across the roof, within our roof scope |
| Replacement / specialist | Assessment or new roofing by a roofing specialist | The roof is extensively deteriorated or not a sensible candidate for coating |
How a Officer roof job runs
- 01
Inspection and quote
We look at roof type, condition, access, defects, extra roofs and any rainwater tank, then give you a written scope.
- 02
Safe access and property protection
Access and edge protection are planned for the property, and surrounding surfaces are protected.
- 03
Cleaning and preparation
The cleaning method suits the roof material. Suspected asbestos cement sheeting is never pressure-washed. Tank downpipes are managed as agreed.
- 04
Repairs identified
Repairs within our scope are done first. Anything outside it is raised with you before painting.
- 05
Coating system
Primer or sealer where required, then a compatible coating applied to the manufacturer's requirements, checked against tank use where relevant.
- 06
Final quality check
We check coverage, edges and finish, then walk you through the completed scope.
Painting a COLORBOND® roof
BlueScope's guidance says COLORBOND® steel can be overpainted with the right preparation and coating selection, but overpainting can affect or void the manufacturer's warranty. If your roof is still covered, check the warranty conditions before proceeding.
Older roofs, sheds and possible asbestos
Asbestos cement products were banned from Australian building materials by the end of 2003. Older homes, sheds, outbuildings and earlier extensions can still contain it, while roofs on newer homes are unlikely to. Age alone doesn't prove asbestos is present and it can't be identified by appearance. Suspected material should be assessed by a qualified professional before it is disturbed. WorkSafe Victoria is the place to start. Older painted surfaces may also contain lead, which changes how preparation is handled.
Estate and council requirements
Requirements for externally visible colours and finishes can vary by property, so check your council and any title or development requirements before changing your roof colour. We can quote the work and leave the approval check with you.
What's included and what isn't
Included in a standard roof quote: the agreed cleaning and preparation, moss and lichen treatment, ridge capping repairs within our scope, primer or sealer where required, the coating system, protection of gardens, paving and nearby surfaces, clean-up, and a walkthrough, all in a written scope.
Not included unless agreed in writing: re-roofing, structural repairs, roof plumbing and flashing replacement, gutter replacement, tree trimming, and asbestos assessment or removal.
Getting your Officer roof ready
- Trim branches back from the roof where you can.
- Move cars, outdoor furniture, pot plants and garden items away from the house.
- Tell us about pools, ponds, rainwater tanks, solar panels, skylights, antennas and pets before we start.
- Close windows and vents on the day, and tell us about any known leaks.
What to expect on the job
Roof coatings need dry conditions and drying time between steps, so scheduling follows the weather and the manufacturer's requirements. We will explain the sequence and let you know when areas such as paths and entries are clear. We do not promise fixed timeframes, because they depend on the roof, the product and the weather.
Roof work near Officer
Genuine Northern Star Painting roof jobs from nearby suburbs, labelled with where they were done.


Choosing a roof colour
A roof colour should suit the home's walls, trims, gutters, fences and landscaping. Charcoal, grey and other neutral tones are common, but no single colour suits every property, and we don't make heat or energy-saving promises.
Need help choosing? Our colour consultation can help you compare options.
Roof painting: indicative pricing
These are indicative price ranges only. Every project is individually quoted after an on-site inspection. Scope, condition and access change the number significantly.
| Project | Indicative range |
|---|---|
| Small roof, clean and coat | $2,500 – $5,000+ |
| Standard family home roof: restoration and coating | $4,500 – $10,000+ |
| Large or complex roof | $10,000 – $15,000+ |
| Metal / COLORBOND® roof | $3,000 – $12,000+ |
| Re-bedding and re-pointing only | $1,800 – $6,000+ |
Roof size, pitch, type, condition, access, preparation, moss and lichen, repairs, the coating system, the number of roof structures, landscaping and tank-related considerations all affect the price. Every project is individually quoted after inspection, with the agreed scope provided in writing. These ranges match our main roof painting page. See the roof painting cost guide.
What moves the price: roof area and pitch; single or multiple sections; tile or metal; how much moss, lichen and old coating has to come off; ridge repairs; broken tiles; access and edge protection; extra roofs such as garages and patios; and any tank-related requirements.
Why Northern Star Painting
- Based in Melbourne's south east: Working across Officer and the south-east.
- Fully insured: Cover in place for work on your property.
- Dulux & Haymes systems: Paint and materials included.
- Written scope and quote: You see exactly what is included before work starts.
Roof Painting Officer FAQs
How much does roof painting cost in Officer?
There is no set Officer price. Our published indicative ranges are Small roof, clean and coat: $2,500 – $5,000+; Standard family home roof: $4,500 – $10,000+; Large or complex roof: $10,000 – $15,000+; Metal / COLORBOND® roof: $3,000 – $12,000+; Re-bedding and re-pointing only: $1,800 – $6,000+. Roof size, pitch, condition, access, repairs and the coating system all affect the price. Every project is individually quoted after inspection, with the agreed scope provided in writing.
My Officer roof is fairly new. Is it too early to paint?
Not necessarily. Sun fade and chalking can appear well before a roof fails. The inspection checks the tiles, ridge bedding and surface condition, and we only recommend coating when the roof is sound.
Is roof painting worth it?
It can be when the roof is structurally sound and the material suits coating, because it refreshes a faded or weathered surface. It is not worth it on a roof that really needs repairs or replacement, which is why we inspect before recommending anything.
Can you paint a concrete tile roof?
Concrete tile roofs usually can be painted once they are cleaned, checked for cracked or slipped tiles and ridge condition, repaired where needed and primed or sealed where required before a compatible roof membrane is applied.
Do you repair ridge capping before painting?
Yes. Ridge bedding and pointing are checked at inspection and repaired before coating where needed. Painting alone will not hold a loose ridge cap in place.
Will painting my roof stop leaks?
No. Painting does not fix leaks, broken tiles, failed flashings or structural problems. Those are identified at inspection and dealt with first, or by a roofing specialist where they fall outside our scope.
Can you paint a COLORBOND® roof?
Metal and COLORBOND® roofs need cleaning, degreasing, corrosion checks, rust treatment where appropriate, a suitable metal primer and a compatible topcoat. BlueScope advises overpainting can affect its warranty, so check your warranty conditions before proceeding.
Can you paint a roof that supplies a rainwater tank?
It can potentially be assessed, but the coating system must suit the roof and the way the collected water is used. Tell us about the tank before quoting so the proposed product can be checked against the manufacturer's technical information. We don't claim any roof is automatically safe for drinking water.
Can you paint garage, patio and extension roofs?
Often, yes. Each roof is assessed and quoted separately based on its material, condition, access and coating compatibility. Mention them when you request a quote.
How do you deal with moss and lichen on a shaded roof?
Growth is treated and removed during preparation, and the cause, such as overhanging branches or debris in valleys, is discussed with you so the new coating is not asked to hide it.
How long does roof paint last?
There is no guarantee. As a rough estimate, a properly prepared and coated roof may last around 10 to 15 years, but it depends on the roof material, preparation, exposure and the coating system used.
Questions to ask any roof painter
- Will you get on the roof and inspect it before quoting? A roof can't be assessed from the ground alone.
- What happens to the ridge capping? Loose or crumbling ridges should be re-bedded and re-pointed before any coating.
- How will you deal with moss and lichen? It should be treated and removed, not coated over.
- What is the coating system and who makes it? You should be told the product and its requirements.
- Who repairs broken tiles and flashings? Know before work starts who handles what.
- Is the scope written down, including what isn't included? A written scope prevents surprises.
- Are you insured, and how is roof access made safe? Check before work starts.
- Do you take rainwater tanks into account? A roof that feeds a tank needs extra care.
Related pages
Ready to have your Officer roof assessed? Book an inspection and get a written quote.
Ready when you are
Let's paint something you'll be proud of.
Free on-site quotes across Melbourne. No pressure, no shortcuts, just an honest scope and a clean finish.
Request a quote